Description

ZANDSTRA POLISHING TRIANGLE 3M

The ZANDSTRA POLISHING TRIANGLE 3M is used for polishing the blade. A very fine grain of aluminum oxide provides a very smooth surface underneath the blade. Moreover for best results there are 3 different self-adhesive abrasive film papers on a special extruded aluminum triangle. The triangle has a length of 25cm.

ZANDSTRA POLISHING TRIANGLE 3M

Directions of use:

Put the skates in a jig. Start with moving the blue side of the triangle backwards and forwards slowly over the runners. Use the entire surface of the 3M abrasive strip during this action.

When the friction decreases during the polishing (after approx. 1 minute) change over to the green side. When the resistance declines again after 1 minute, and then end with the pink side. When there is no friction one is ready.

This process will take approximately 3 to 5 minutes in total. To make sure that the result is optimal you have to look at the gliding surface of the skate. If you see a “mirror” the result is optimal. If not, do the last (pink) or the second last (green) treatment again.

Polishing Grits:
Blue (40 micron)-coarse
Green (30 micron)- medium
Pink (3 micron)- medium-fine

 Remember to buy a spare set of Replacement strips.

Brand

Zandstra